The weather is getting cooler – is the inspection still ongoing?
Thread Content
The weather is getting colder gradually. As chemical industry workers who work shifts on the front line, will you still carry out inspections on time? Can inspections still be done thoroughly when done on schedule?
Let me reply first: Some colleagues are able to do this, day in and day out for ten years. But other colleagues hide themselves when the weather is hot or cold.
The inspections must continue, though shortcuts might be taken.
In fact, whether inspections are carried out or not is driven by accidents or near-misses; it is only after learning from such accidents that one knows what to do. Each season has its own key aspects, and the focus of management differs significantly between summer and winter. Let’s not talk about typhoons in summer; the biggest concern in summer is overheating of pump bearings, while in winter the main problem is freezing of instrument displays. Management in the north is also different from that in the south.
Since it’s already been done, there’s no need to cut corners; just finish it.
Whether the weather is hot or cold, the quality of necessary inspections must be maintained; the weather should not affect the quality of these inspections! This is the basic minimum standard for employees.
No problem; inspections need to be carried out to the required standard of quality and quantity.
Firstly, it is necessary during inspections; secondly, once it is done, it must be done well
Either don’t do it, or if you do, do it well – that’s also a kind of attitude.
In the north, freezing of instruments during winter is common; in addition to monitoring from the control room, on-site inspections are essential. Most production inspections are carried out every two hours, with records kept after each inspection. Inspections help identify potential hazards and are an indispensable part of ensuring safe production.