Thread Content
1. The safety devices of the construction elevator cab are not sensitive enough. 2. The interlock mechanism of the construction elevator doors does not function properly. 3. There is no protective canopy at the entrance and exit of the cab on the ground floor. 4. There are no safety doors at the unloading points on each floor. 5. The safety doors at the unloading points on each floor are not used. 6. The operator is working without a valid license. 7. The elevator is overloaded with regards to both passengers and cargo. 8. The elevator is used with an additional load in place. 9. There is no construction plan for installing or removing the external elevator. 10. The teams responsible for installation and removal do not possess the necessary qualifications. 11. No safety and technical instructions were provided before installing or removing the external elevator. 12. Inspection is not carried out as required after installation. 13. There are no quantitative criteria for inspection during the verification process. 14. The verticality of the elevator frame exceeds the requirements specified in the manual. 15. The electrical control system lacks leakage protection devices. 16. There are no lightning protection devices in areas outside the lightning protection range. 17. The external elevator is used without passing mechanical inspection. 18. The necessary registration procedures for using the elevator are not followed