Thread Content
1. The material lift basket lacks a fixed docking device. 2. The material lift does not have an over-height limit device. 3. The overhead lift lacks a lower limit switch. 4. The overhead lift has no overload protector. 5. The overhead lift lacks a buffering device. 6. The tie rods are not properly connected to the scaffold. 7. The material of the tie rods and the way they are connected do not meet the requirements. 8. The wire rope exceeds the specified limits for retirement. 9. The wire rope clamps do not meet the requirements. 10. The wire rope lacks protection when passing over obstacles. 11. There are no protective railings on either side of the floor unloading platform. 12. The planks on the floor unloading platform are not properly laid or secured. 13. The floor unloading platform lacks fixed safety doors. 14. The ground feeding entrance lacks a safety shelter. 15. The safety shelter at the ground feeding entrance is not constructed properly. 16. The basket lacks fixed safety doors. 17. The overhead lift does not use a basket. 18. The installation of the material lift was not inspected according to regulations. 19. There are no construction plans for the installation or dismantling of the material lift. 20. The foundation of the scaffold does not meet the requirements. 21. A fine-mesh safety net is not used on the outside of the scaffold as required. 22. The winch is not securely fixed. 23. The pulley flanges in the traditional system are damaged. 24. There is no reliable communication signal