Can the height of the tower skirt base be customized? Are there standard sizes or standard series?
Thread Content
Can the height of the tower skirt base be customized? Are there standard sizes or standard series? For a 2.5-meter tower, is it okay if the distance from the bottom of the skirt seat to the upper part of the lower seal is around 1 meter?
The height of the skirt base should take into account the installation of the pump at the bottom of the tower; I haven’t seen any specific standards for this yet
The 1m mentioned by the poster is too small; there are base bolt seats below, and the installation space for the holes also needs to be considered. The skirt space generally allows enough height for one person to enter; with a diameter of 2.5m, it is recommended that the height of the skirt be 2.5m.
The net positive suction head required for the bottom pump, right?
It can be customized according to the actual conditions on site.
Designed based on the net positive suction head of the bottom pump