Dimensions of the waste chlorine absorption tower
Thread Content
I have a question: In the chlorination reaction, the amount of chlorine in the exhaust gas is about 10 m3/h (approximately 30 KG/h), while the amount of air is about 20 m3/h. Sodium hypochlorite can be prepared by absorbing it with 15% liquid caustic soda. What are the approximate dimensions of the absorption tower (tower diameter, packing height)? What flow rate should be selected for the liquid caustic circulation pump? I appreciate your guidance! Thank you so much!
This value is very small; based on experience, for a tower diameter of 400–500 and a packing height of 5–6 meters, a flow rate of around 5 m3 per hour is sufficient for the alkali solution circulation pump
The tower diameter of DN400~DN500 is definitely much larger as well