How much is the typical investment for a polyoxymethylene production plant?

The price needs to be negotiated with the supplier. Our company has introduced foreign technologies as a complete package; I’m not exactly sure about the specific cost either

Based on the current investment levels for new installations, the approximate figure is around 250 million yuan per 10,000 tons of polyoxymethylene.

Based on the current understanding of investment costs, the investment for a POM production facility with an annual capacity of 10,000 tons can be kept at around 170 million yuan, while the total investment for a facility with a capacity of 60,000 tons should be around 1 billion yuan!

:lol :lol :lol :lol 10,000 tons/200 million is enough. This post was last edited by WEIHONGPENG1980 on 2009-3-22 09:40]

Hello everyone! Could you tell me what type of polyoxymethylene process you are using? Which process is currently the best and most advanced? Thank you.

Brief reply: 1. Project investment is highly dependent on factors such as plant scale, process technology used, and product grades; it cannot be generalized. 2. Currently, the investment required to produce polyoxymethylene using imported foreign technology is approximately 200-300 million yuan per 10,000 tons of production capacity, depending on the scale of the facility. 3. The 60,000-ton per year polyoxymethylene production project of Shenhua Ningxia Coal Industry Group Co., Ltd. still holds certain reference value; an EPC contract for this project has already been signed, and it is to be carried out by China Wuhuan Engineering Co., Ltd., which is part of Sinochem Engineering Corporation (formerly the Fourth Design Institute of the Ministry of Chemical Industry). Project Overview: (1) Product Plan The product plan for this project is to produce 60,000 tons of polyoxymethylene per year (based on the MC90 product). (2) Project investment: The total investment for this project is 1,698.65 million yuan. (3) Project operation hours: The annual operation time for this project is 8,000 hours (approximately 334 days). (4) Project construction content · Process technology: This project utilizes the copolymerized formaldehyde production technology of Fuyi International Engineering Company. The production of formaldehyde from methanol employs the silver process, trioxane is produced using the benzene extraction method, and the polymerization process features a single-line polymerization capacity of over 30,000 tons per year. ·Process units: mainly include fixed-catalyst bed formaldehyde reactors (Series 3), vessel-type trioxane formalsdehyde reactors (Series 1), dioxolane reactors (Series 1), and horizontal polyformaldehyde reactors with coaxially rotating twin-screw mixers (Series 2). ·Auxiliary facilities: intermediate tank area, control building, etc. ·Utilities: heating systems, demineralized water systems, etc. ·Environmental protection facilities: exhaust gas incineration system, wastewater treatment system, wastewater reuse treatment system, etc.

Upstairs, I saw your comment regarding the typical investment amount required for polyoxymethylene production facilities; it’s clear that you’ve done quite a bit of research on this topic. Recently, I’m planning to work on a project related to the modification of polyoxymethylene. Could experts provide some practical advice or relevant information? My email is superdragon555@yahoo.cn and my QQ number is 350173607. Thank you