High-pressure coal slurry pump
Thread Content
How to deal with oil leakage from the piston rod seal of a high-pressure coal slurry pump
Generally, it does not affect the pump’s performance, so no action is necessary for now (it is important to determine whether it is lubricating oil or hydraulic oil); if it does have an impact, the only solution is to shut down the pump and replace the fluid.
Observe first; as long as it does not affect normal production
When the leakage amount is small, drain the leaked hydraulic oil through the plug at the bottom. Pay attention to the oil level in the tank and top it up promptly. If the leakage is too severe to allow operation, the pump must be stopped and the packing, that is, the oil seal, replaced.
Top up oil in a timely manner and prepare spare parts! ! Which company makes the high-pressure coal slurry pump? ? ?