Parameters and installation instructions for the Pike gear pump PGP500 series

Thread Content

For those who wish to purchase Parker PGP500 series gear pumps, it is crucial to understand the parameters of this series as well as the installation requirements. In this section, Autos will explain what the parameters of Parker PGP500 series gear pumps are. Series: Parker gear pump PGP/PGM500 Series. Specifications: 8.3, 12.8, 16, 24, 31, 40, 51.5. Operating pressure: Rated pressure of 35 MPa, peak pressure of 42 MPa. Features: · High pressure; continuous operating pressure up to 275 bar. High-strength materials and large shaft diameters reduce bearing load, enabling operation under high-pressure conditions. ·The low-noise PGP 503 features a 9-tooth gear, while PGP 505 and PGP 517 have 13-tooth gears; PGP 511 has a 12-tooth gear. The valve distribution structure has been optimized to reduce pressure fluctuations, resulting in smoother and quieter operation (a noise-reducing \"Miyako\" version is also available for PGP 511). ·High efficiency: Under all operating conditions, the floating bushing structure with pressure balance ensures the highest efficiency. ·The flexibility of the application, along with international installation and connection dimensions, the ability to integrate various valve types, and the multi-pump configuration using a common inlet, provide unparalleled flexibility in system design and application. ·It can be integrated to install a wide variety of control valve components