What type of pump should be chosen?
Thread Content
I’m seeking advice from fellow sailors. My process conditions are as follows: the temperature is 190 degrees, and the medium contains a small amount of particles as well as gas. Which pump would be suitable for such conditions? The pump is used in the reaction cycle, with a flow rate of 50 m3/h and a head of around 25 meters.
Choose a hot oil pump, with the impeller being of the open or semi-open type.
It is necessary to check the level of gas content; centrifugal pumps generally require a gas content of less than 5%, and for small amounts of solid particles, a semi-open impeller can be used
What medium is being transported? A gas-liquid mixed transport twin-screw pump can be used
sliding vane pump
It is recommended to use an open impeller centrifugal pump, or a pump equipped with an inducer wheel