Regarding the issue with the pump’s foot screws
Thread Content
This post was last edited by The Youth Who Chases the Wind_CXSY on 2017-12-15 at 17:27. The pumps used in our company’s new projects are second-hand and come without foot bolts. The water pump has a head of 50m and a motor power of 22KW. The base screw hole is 24mm. Is there anyone who knows something about this who can help solve it? What thickness, length, and diameter for the hook portion are required for the foot?
If the hole diameter is 24, then an M20 screw will suffice, based on a burial depth of 20d. The 4-M20x500 will work. The flow rate of this pump is only about 50 to 60 cubic meters, and the motor isn’t large either. 4-M16x400 is actually sufficient
It’s ready. L-shaped MM22×300