Pressure fluctuations in the liquid oxygen pump are not significant
Thread Content
This post was last edited by Catalyzing a Grain on 2018-9-26 at 11:49. The motor of the liquid oxygen pump as well as the pump itself have been confirmed to be in good condition; the inlet valve and filter screen have been cleaned, and the return valve has also been inspected. Now, the pressure of the pump fluctuates once it reaches 2.0 Mpa. What could be causing this?
Please provide the pump parameters, the curve, and the inlet pressure. The flow rate of the pump at the moment
If the equipment is fine, it is recommended to consider from a process perspective what might be the issue.
Consider whether there is a problem with the process system.