Water ring compressor
Thread Content
Adjust the packing gland until water drips out in drops, which is the ideal condition. (Water dripping out – isn’t that just a leakage in the packing seal?) ) Although packing seals allow some leakage, it’s not good either if it drips in this way.
Leakage is necessary to cool the packing and prevent it from burning out. It’s just a matter of the amount of leakage.
The standard specification for packing seals allows for some dripping, mainly to prevent the situation where the packing seal is tightened too much or where there is a lack of fluid flow. If dripping is not desired, other types of seals such as mechanical seals can be used
Dripping is not allowed, usually due to the property owner’s environmental requirements or those set by higher-level authorities. You can try to recycle it and add a protective cover. According to the regulations of foreign companies, rotating parts must be protected. This way, it is protected, out of sight, and also recycled. Everyone is satisfied