Can I apply some high-gloss polish after painting the pump for maintenance?
Thread Content
Can I apply some high-gloss polish after painting the pump for maintenance?
This post was last edited by 3983596_FPPZ on 2019-4-14 09:38. If the customer has no specific requirements, any spraying method can be used, as long as it is approved by the customer and meets the on-site conditions. Enterprises should have their own standards for painting processes, as painting is a special type of process where process control is very important; in addition, environmental protection, fire safety, and occupational health considerations are also key aspects to take into account. If the customer requests it, the paint thickness and film strength must be tested. Additionally, the polishing paint should be of the same type as the original paint; care must be taken to ensure it does not react with the original paint, otherwise the results will be disastrous