Help: Centrifugal pump with a capacity of 1.5 cubic meters per hour, sludge return pump
Thread Content
We are now designing small rural sewage treatment systems with very low flow rates. We now need to select a centrifugal pump to be used as the sludge return pump for our secondary sedimentation tank. The required specifications are: 1.5 m3/h at 10 m pressure, with the sludge content being less than 2%. Does anyone know a suitable manufacturer? I’ve looked everywhere but couldn’t find a pump this small. This is still an export-oriented product, with a different voltage of 460V/60HZ. . .
Ask those who make stamping and welding pumps whether their pumps can handle this solid content
Choose outlet 25, with an impeller diameter of around 200, a 4-pole motor; after the impeller is cut, it can operate at low flow rates, which should be sufficient
Pump with 25 inlet and 20 outlet ports, solid content of 2%, centrifugal pumps are acceptable. Cut the impeller.
Can you just say it directly? Is it suspected of being advertising? We used one before that worked pretty well. You can check the lift pump. You can look it up online; if you need the manufacturer, message us privately so it doesn’t get deleted by the moderators.
Thinking differently, a single-screw pump can be used. It’s better than centrifugal pumps. I hope I can help you.
A single-screw pump is a suitable choice; the Nm031-01L from Mettler or the BN2-6L from Sepac can meet your application requirements
Gel-coated twin-screw pumps offer superior performance parameters in all aspects compared to single-screw and conventional twin-screw pumps, 15068542311
You might consider choosing a rotor pump!