The two reactors of the 400,000 tons/year polypropylene unit of the Guangxi Petrochemical Refining and Chemical Integrated Transformation and Upgrading Project are hoisted into place
Thread Content
On November 25, the 2# reactor (3600-R-4301) of the 400,000 tons/year polypropylene unit of the Guangxi Petrochemical Refining and Chemical Integrated Transformation and Upgrading Project was hoisted into place at one time. On the 26th, the 1# reactor (3600-R-4001) was hoisted into place at one time, which was completed one day ahead of schedule. It is reported that the two reactor towers hoisted this time are both made of Q345R. The height of the 2# reactor is 41.846m, the maximum diameter is 7.62m, and the static mass of the equipment is 328.4t. The height of the 1# reactor is 46.884m, the maximum diameter is 8.712m, and the static mass of the equipment is 645.1t.
More pictures of Guangxi! ! ! The main body of the large-scale cracking gas compressor unit of the integrated ethylene plant of petrochemical refining is in place https://bbs.hcbbs.com/thread-5674765-1-1.html (Source: Haichuan Chemical Forum [Haichuan.com])
Many pictures! ! Guangxi Petrochemical Refining and Chemical Integrated Transformation and Upgrading Project has completed an important node and the installation is in full swing https://bbs.hcbbs.com/forum.php?mod=viewthread&tid=5674944 (Source: Haichuan Chemical Forum [Haichuan.com])
Is this a polypropylene reactor? It looks like polyethylene, but the picture accompanying the report is this @wise manming
It should be a polyethylene reactor with a typical "microphone type" construction. The polypropylene reactor is a straight short cylinder structure, as shown in the attached figure.
This is a slurry type: Are polypropylene reactors mostly made of loop tubes?