Oxidation furnace
Thread Content
I would like to ask whether removing the wire mesh at the upper part of the oxidizer distributor will affect the distribution of ammonia and air, as well as the oxidation rate? (100,000 tons/year * ao acid) Thank you
I searched for relevant information online: The distributor of the ammonia oxidation furnace is characterized in that it includes a distribution tank with openings at the top and bottom; a distribution plate is installed at the upper part of the distribution tank, and the lower side of this distribution plate features square grids； Each square grid is equipped with distribution holes that run through the distribution plate ； The upper circumference of the distribution tank is welded to the shell of the ammonia oxidation furnace, while the lower shell of the distribution tank is welded to the ammonia oxidation furnace shell via connecting steel plates ； The distributor is connected to the ammonia oxidation furnace shell via a suspension rod. This distributor ensures a more uniform and optimal distribution of the mixed gas over the platinum mesh, thereby significantly increasing the yield of nitrogen oxides. If the positive effect is removed, it’s gone.