Ammonia-based desulfurization issues in coking plants
Thread Content
Last year, a new set of desulfurization towers and regeneration towers, along with spray oxidation regeneration tanks, were installed. What is the reason for the blockages in the regeneration towers? Is it because these regeneration towers are not effective? The gas passes through the first two desulfurization towers and then through this newly installed desulfurization system; theoretically, most of the sulfur should already have been removed. Yet there are still blockages caused by the remaining sulfur. I suspect that the problem lies with these towers themselves
The main injector is clogged; clean it up. How is the air flow? How is the regeneration effect? If it’s a tower type, with the regeneration tank on top, it’s very troublesome to get clogs! WeChat ID: 1123267744
Either the pump lacks sufficient power or there is a problem with the quality of the injector
Check and see if the suspended sulfur level is high
Where are you from? We can solve this problem
I have been to Wuhai in Inner Mongolia; I dealt with issues at Huaxin Coking
I have been to Wuhai in Inner Mongolia; I dealt with issues at Huaxin Coking
Check the air intake volume and measure the suspended sulfur
Check the suspended sulfur and regeneration processes. I specialize in desulfurization design and operation; feel free to consult me if you have any questions. QQ: 596599094
Is desulfurization tower packing needed? If you have any needs, feel free to contact me. Thank you!