Urgently need a schematic diagram of the internal structure of the air-cooled tower
Thread Content
Does anyone have schematic diagrams of the interior of air-cooling towers for air separation units? Could you upload a few of them?
What kind of schematic diagram is needed? The structure is very simple; I’ve been inside it many times already
I just want to know how the air-cooled condensate return pipes are routed inside the tower Are there any photos or diagrams? Send it over to take a look
Air-cooled condenser return pipe? The temperature inside the cryogenic tank of the air separation unit is around -190 degrees; how is the return water sent back? Isn’t everything frozen?
It’s exactly as shown in his PID diagram: the return pipe at the bottom goes straight back into the pipeline network, with no connection to the tower at all. . On the contrary, there are several rows of baffle plates at the bottom of the water cooling tower
Search this edition and you’ll find internal photos posted by netizens
It’s an air-cooled tower; it has nothing to do with the cold box
Is the return water inlet welded directly to the tower wall? Is there an extension to the bottom of the tower?
The return pipeline isn’t just a hole made at the bottom of the tower. A hole is made in the tower wall to insert a pipe, which is then bent so that its opening faces the bottom of the tower; the return water is forced to the return water inlet under the pressure generated by the air-cooled tower.
OK! This is what I want to confirm. The answer was very clear