What type of valve should be used for the outlet valve of a Roots blower?
Thread Content
What type of valve should be chosen for the outlet valve? Also, what is the actual function of this outlet valve? I’ve reviewed some information; the outlet valves of rotary vacuum pumps are always fully open, so such valves serve no purpose in regulating flow. Moreover, since it’s a gas circuit, there’s no need to shut off the pipeline for maintenance
A Roots blower is a positive-displacement blower; whatever amount of air enters must also exit. A valve is installed at the outlet to shut off and service the Roots blower. Since the pressure in the blower is not high, any type of valve will do; for cost-effectiveness and ease of installation, a butterfly valve is a good choice
The actuator can be pneumatic, hydraulic, or electric for butterfly valves.
There are not many requirements regarding the type of outlet valve to be used; gate valves, globe valves, and ball valves are all suitable. It is correct that the outlet valve does not have a flow control function. The purpose of installing outlet valves is for purging and leak testing; furthermore, it seems to have become a* common practice to install valves at the inlet and outlet of pumps. Finally, some outlet valves are also missing.
Our company uses butterfly valves! ! ! ! ! ! ! ! ! ! ! ! ! !
Generally, the butterfly valve is closed tightly, but the outlet valve is still necessary; otherwise, the starting current will be too high. Also, if your system requires isolation, then a shut-off valve is necessary as well.
Valves are used to isolate rotary vane blowers; in my opinion, butterfly valves, gate valves, ball valves, and the like are better choices, while globe valves don’t seem to be very suitable
A butterfly valve will do; it meets the equipment’s process requirements and is cost-effective.