Can rope holes for maintenance be designed on the top of a circulating fluidized bed boiler?
Thread Content
1. Can rope holes for maintenance be designed on the top of a circulating fluidized bed boiler? 2. Are there any regulations?
It is completely feasible, and in fact it is necessary to use them. The wire rope holes in the furnace roof can be used in conjunction with maintenance baskets inside the furnace, which facilitates quick access to the water-cooled walls inside the furnace. The main thing to keep in mind is that there must be a set of safety regulations; for this purpose, the guidelines for using aerial work baskets can serve as a reference. Additionally, anti-friction measures should be in place at the areas where the wire ropes pass through the furnace roof, to prevent the wires from being cut due to prolonged movement during use. After maintenance is completed, these wire rope holes should be restored to their original state, to avoid smoke and ash leakage during operation