Brief introduction to soft links

Thread Content

This post was last edited by ztj1118 on 2015-7-24 at 11:29. The connection between the processes using field devices is a logical connection, or what can be called a soft connection. This type of communication link is also referred to as virtual communication connection. 　　Three virtual communication modes for the foundation fieldbus: 1. Client/server type ； 　　2. Statement hairstyle ； 　　3. Release/Predetermined acceptance type. 　　A soft transition means slowly raising the clutch to ensure smooth connection between the gears. Used for starting, the hard connection is an agile lift concentrator. It is usually used to speed up shifting. 　　In this process, copper connectors are manufactured through the following technical steps: selecting appropriate materials → manufacturing molds → cutting the materials → arranging and stacking them → pickling → treating the surface → insulating → melting → sawing to remove burrs → drilling → polishing the surface → tin plating the conductive surfaces → shaping → packaging → storing them. The casting technique for copper connector transition joints involves preparing the materials according to technical specifications, placing them in an insulated furnace; once the temperature reaches around 600°C, the materials are taken out, coated with a special solvent, and then placed firmly into the prepared molds. The melted metal (at a temperature of around 1200°C) is poured into these molds, where it solidifies at high speed to form the desired shape. Once the casting has solidified, the mold can be removed to extract the finished product.