Flammable gas detection alarm
Thread Content
Is the detection and alarm device for combustible gases subject to mandatory inspection where you are?
An annual inspection is necessary.
This post was last edited by jujiangliu on 2015-7-29 at 16:24. It must be inspected by a qualified testing institution, with the inspection interval not exceeding one year. CNPC requires an inspection every six months.
You can conduct self-checks by purchasing gauge gas! ! ! ! ! ! ! ! ! ! ! !
An inspection must be carried out at least once a year, and the inspectors must hold provincial-level certification for such inspections
There is no mandatory requirement for testing here, but as regulations become stricter in the future, this will likely become necessary as well.
It must be calibrated by a qualified calibration institution, with a calibration cycle not exceeding one year
“**The Safety Supervision Bureau stipulates that in the event of safety accidents caused by alarms failing to be inspected and calibrated on time, the relevant personnel will be held accountable for their negligence. In accordance with the relevant provisions of the Metrology Law of the People’s Republic of China, combustible gas detectors are classified as metering instruments subject to mandatory verification, and such instruments must undergo mandatory verification in accordance with the law. ”
This falls under the category of mandatory inspection; failing to conduct it is considered a violation, whether it is required or not!
Safety is no trivial matter. Companies may have various reasons for not conducting inspections, but when something goes wrong, it’s always the managers who bear the responsibility, while it are the employees on site who suffer as a result.
Yes, it must be inspected by a qualified local authority