Regarding the feeding of solid microreactors
Thread Content
When manufacturing a microreactor for solids, the issue encountered is feeding. When using a solvent to dissolve the feed, any solvent capable of dissolving this solid can react with the catalyst. If it melts into a solid, such a small microreactor cannot be fed with heat. I’d like to ask everyone, how should such a problem be solved?
@liang1971 @WisdomBright @zhangql
Solid particles can be ground into fine particles and then transported using a liquid that does not dissolve those solids. By selecting the appropriate density and flow rate of the liquid, neither premature reactions nor blockages in the channels will occur – Shandong Haomai Chemical Technology Co., Ltd