Space furnaces are in full swing!
Thread Content
The last edit to this post was made by TH373637 on 2015-8-24 at 15:10. According to a notice from the aerospace engineering sector, the company, in conjunction with Sinochem Sixth Construction, won the bid for the gasification project of Tianjin Bohua Yongli Chemical Co., Ltd. Construction period: August 2015--December 2016. The project is located in the Tianjin Lingang Economic Zone, with an investment of around 407 million yuan. It utilizes aerospace-based pressurized coal gasification technology to produce CO and H2 (at a production rate of about 100,000 cubic meters per hour), thereby supplementing the capacity of the existing gasification facilities. Currently, Aerospace Engineering, Sinochem Sixth Construction, and Yongli Chemical are in discussions regarding the relevant contracts.
Will this project be affected if there are external link URLs?
I support domestic products; I don’t know much about space furnaces, but the output per furnace is also acceptable. What are the main disadvantages? Is the operation cycle short? ?
There is no universal gasification furnace; the choice of furnace depends on the actual characteristics of the coal. In other words, it’s like choosing a cooking appliance based on the ingredients to determine what dish will be prepared. The main disadvantages are: 1. The effective gas stream contains a lot of dust； 2. There are many system interlocks; especially during testing, changes in data may cause the system to shut down ； 3. Various factors can cause the furnace temperature to rise above normal levels, leading to the damage of refractory materials and even the coils ； 4. Due to factors such as unstable operation ； 5. Coal with a high ash fusion point requires blending with other coals or limestone, etc ； 6. Low pressure, high CO content, etc. It also has many advantages: high conversion rate, strong adaptability to different coal types, etc.
Space furnaces are currently very popular; in China, aside from those with four nozzles produced by Yankuang and East China University of Science and Technology, it is this type of furnace that has the best performance
What is the end product of this company in Tianjin using syngas?
The possibility of using methanol or synthetic ammonia for chlor-alkali production is too low