Special valves for filling liquid chlorine – please recommend
Thread Content
The liquid chlorine tank is equipped with two valves: one for automatic filling and another for automatic evacuation. I would appreciate it if experts could recommend some brands and manufacturers. For the valve used for automatic filling, it needs to be of French origin. Thank you
Same request; it would be best if specific settings and installation instructions were included.
If it is a control valve, Beijing Aitam can be a good choice; the material used is HC alloy, and it is a diaphragm control valve. The diaphragms used by this company are of German origin and of high quality.
Our family’s liquid nitrogen filling station uses Aitam’s cryogenic control valves, and they work very well
This post was last edited by Valve Engineer on 2015-9-24 10:39. Hello. I am Engineer Shen, who works in the field of imported valves. My work involves hazardous materials such as liquid chlorine, fluorine, hydrogen chloride, hydrogen fluoride, phosgene, chlorosilanes, nitrogen trifluoride (NF3), and other substances that are corrosive, flammable, explosive, or capable of self-ignition. I also deal with all liquid materials classified as Category M as specified in ASME B31.3. Please provide the technical parameters and operating conditions. for selection purposes. Shen Gong