Sliding carbon phenomenon occurs in the Ende furnace

Big bro, could you explain what \"sliding carbon\" means?

I’ve never heard of this term; is it coal ore that comes from mining?

The reasons for carbon slippage in Ende furnaces include: irregular operation of the furnace during startup or production, with large slag masses at the entrance of the ash discharge pipe; since the amount of ash discharged is greater than the amount of material fed in, this leads to carbon slippage； Another issue is leakage from the ash discharge machine, which causes carbon slippage ； Sliding carbon can easily lead to a decrease in the material level inside the furnace; improper operation may result in the accumulation of slag again, that is, slag sticking to the nozzle ； To reduce carbon slippage, one method is not to empty the material in the ash storage tank completely each time ash is discharged, leaving half of it there ； If it’s the ash discharge pump that is leaking, stopping the water supply will resolve the issue ； Since it has been confirmed that there are slag blocks in the ash discharge pump inlet pipe, we will wait for an opportunity to shut down the furnace for cleaning.

Agree with the opinion above; in case of minor carbon slippage, the slag extractor can be temporarily stopped or the plug valve can be closed

Replace it in a timely manner to prevent changes inside the furnace as a result of the ash extractor, which could lead to an increase in the pressure in the annular tube.