How to determine the slurry flow rate of the circulating pump in wet flue gas desulfurization
Thread Content
What is the optimal slurry flow rate for the circulation pump in a cyclone plate tower?
Mainly consider the flow rate; first and foremost, there should be an adequate amount of water
We should consider the fact that the dust content in the slurry does not precipitate; if the flow rate is too high, wear also needs to be taken into account. Generally, the value is around 1.5 before the pump and around 2.0 after the pump
In addition to what was mentioned above, attention should also be paid to the pressure at the outlet of the sprinkler nozzles