Thread Content
This post was last edited by Xiao Gong 1985 on 2016-2-18 at 11:16. Due to the persistently low oil prices, and in order to enhance the competitiveness of our products in the market and increase profits, at the request of the manufacturer, we converted a 200,000-ton/year gasoline and diesel hydrogenation unit in Shandong’s local refining facility into a 100,000-ton carbon-9 hydrogenation unit; the raw material for this unit is C9 produced through the cracking process in ethylene plants, which is used to manufacture aromatic solvent oils. The main use of aromatic solvent oils is as solvents for paints and coatings. Previously, xylene was the main solvent used for paints and coatings. Since around the 1990s, with the development and introduction of aromatic solvent oils in China, these oils have gradually taken over the market alongside mixed xylene. The domestic paint and coating market is gradually expanding. On the one hand, mixed xylene is a key raw material for polyesters; on the other hand, since aromatic solvent oils are cheaper than xylene, and their boiling points are higher than those of xylene, resulting in a slower rate of evaporation, the paints and coatings produced with these oils exhibit better flow properties and brightness. This is especially evident when used for high-quality baking coatings. Additionally, aromatic solvent oils can be used to produce products of various grades. Therefore, it is an inevitable trend for aromatic solvent oils to replace xylene. According to statistics from the paint industry, solvents account for about 50% of the total amount used in paint production, with aromatic solvents making up 30% to 40% of that total. Heavy aromatic solvent oils account for over 40% of the market share in the aromatic solvents sector, with an annual consumption of around 150,000 tons. At present, China’s construction industry and automotive sector are in a period of rapid development, resulting in a high demand for solvents used in paints and coatings.
Was the transformation successful? How many products does your C9 hydrogenation unit produce?
I’m about to drive it; the modification took 4 months
I’m about to drive it; the modification took 4 months
What materials are generally used for storage tanks containing carbon-9 in concentrated form? Will ordinary carbon steel work?
I haven’t been here for a long time; the operation started on March 8, 2016. Adjustments were made in light of market conditions, and two types of products are now produced: gasoline and diesel.
Was this adjustment made because of the poor market conditions for aromatic solvent oils? How do I adjust it? Could we have a detailed discussion? QQ: 420780980