【Daily Question】11.17 Multiple-choice question: When a plant is put into operation, interlocks are generally enabled at ( )
Thread Content
This post was last edited by Catalyzing a Grain on 2015-11-17 at 10:45. When the device is put into operation, interlocks can generally be activated at ( ). A. After the device is operational and stable B. Before starting feeding C. Keep it in use after testing D. Once the individual equipment is operational and the interlock parameters are stable D
When the unit is put into operation, interlocks can generally be activated at (A). A. After the device reaches stable operation B. Before starting feeding C. In operation continuously after testing D. After the individual equipment starts operating and the interlock parameters stabilize
D. Once the individual equipment is put into operation and the interlock parameters are stable
When the unit is put into operation, interlocks can generally be activated at (D).
When the unit is put into operation, interlocks can generally be activated at (D).
When the plant is put into operation, the interlock system can generally be activated after (D) the individual units are started up and operating, and the interlock parameters have stabilized.
D. Once the individual equipment is put into operation and the interlock parameters are stable
When the unit is put into operation, interlocks can generally be activated at (D). A. After the device reaches stable operation B. Before starting feeding C. In operation continuously after testing D. After the individual equipment starts operating and the interlock parameters stabilize
D. Once the individual equipment is put into operation and the interlock parameters are stable