【Daily Question】Chemical Engineering Principles 243: Absorbents (November 24)
Thread Content
This post was last edited by “Back to Cambridge” on December 5, 2015, at 14:28. Starting today, the Chemical Engineering Theory section is launching the “Question of the Day” activity, aimed at helping everyone reinforce their basic knowledge in chemical engineering. Subsequently, series such as “Fundamentals of Chemical Engineering”, “Mass Transfer and Separation”, “Chemical Thermodynamics”, and “Chemical Process Engineering” will also be introduced. We hope for your active support! For replies to the “Question of the Day” activity, answers can be viewed directly; however, the thread will be closed after one day ! Participation earns 3 wealth points, with an additional 3 wealth points for correct answers. Short answer question: The 4 key factors to consider when choosing an absorbent are ___________, ___________, ___________, ____________. Solubility ； selectivity ； Volatility ； Viscosity.
When selecting an absorbent, the 4 main factors to consider are ___solubility__、__selectivity__、___volatility__、and ___viscosity___.
Solubility; selectivity; volatility; viscosity.
When selecting an absorbent, the 4 main factors to consider are solubility； selectivity ； Volatility ； Viscosity.
When selecting an absorbent, the 4 main factors to consider are solubility； selectivity ； Volatility ； Viscosity.
When selecting an absorbent, the 4 main factors to consider are solubility； selectivity ； Volatility ； Viscosity.
Low volatility, non-toxic and harmless, non-corrosive, inexpensive and readily available, with simple subsequent separation.
When selecting an absorbent, the four main factors to consider are: solubility, selectivity, volatility, and viscosity.
When selecting an absorbent, the 4 main aspects to consider are _solubility, selectivity; volatility; viscosity_.
When selecting an absorbent, the 4 main aspects to consider are _solubility, selectivity; volatility; viscosity_.
Selectivity Solubility Volatility Viscosity