Integrated SBR wastewater treatment equipment with excellent treatment performance

Thread Content

The integrated SBR wastewater treatment equipment offers excellent treatment results. Principle of the integrated SBR wastewater treatment equipment: It is suitable for use in the domestic, slaughterhouse, and hospital industries. SBR stands for Sequential Batch Reactor process; this technology consists of reactors that operate intermittently in a sequential manner over fixed time intervals. The operation cycle for each intermittent reactor during wastewater treatment includes stages such as water inlet phase, reaction phase, sedimentation phase, sludge discharge phase, and idle phase. Application scope of integrated SBR wastewater treatment equipment: 1. Domestic wastewater from small and medium-sized towns, as well as industrial wastewater from factories and mines, especially in areas where discharge is intermittent and flow rates vary significantly. 2. In areas where high water quality is required, such as scenic spots, lakes, and harbors, it is necessary not only to remove organic matter but also to eliminate phosphorus and nitrogen from the water in order to prevent eutrophication of rivers and lakes. 3. Areas with scarce water resources. The SBR system can undergo physical and chemical treatment after biological treatment; no additional facilities are required, which facilitates water recycling. 4. Areas with limited land availability. 5. It is highly suitable for treating small volumes of industrial wastewater with intermittent discharge, as well as addressing pollution from scattered point sources. Introduction to integrated SBR wastewater treatment equipment: The integrated SBR wastewater treatment equipment uses efficient fillers inside, which serve as a support for microorganisms. The SBR process employs the biofilm method; one of the advantages of this method is that it allows for thorough contact between microorganisms and wastewater, thereby improving the efficiency of treatment. The SBR process has the function of nitrogen and phosphorus removal. The SBR process is divided into four phases: influent phase, reaction phase, sedimentation phase, effluent and sludge discharge phase, and idle phase. Inflow phase: During this stage, the installed mixing equipment is activated to mix the incoming wastewater thoroughly with the sludge remaining in the tank from the previous cycle. Reaction period: This stage is the aeration phase, during which the decomposition of BOD5 takes place. Settling period: To separate wastewater from sludge. Drainage and sludge discharge period: This stage is the period for sedimentation and sludge discharge of wastewater. Idle period: This stage is the sludge activation phase. Features of the integrated SBR wastewater treatment equipment: The entire process has a simple structure, is compactly arranged, occupies less space, has low investment and operating costs; it does not require a regulating tank or a secondary sedimentation tank, and is less prone to sludge bulking. After-sales service commitment of Henan Huanyuan Environmental Protection Technology Co., Ltd.: 1. The warranty period for the integrated SBR wastewater treatment equipment is one year from the time it starts operating (the warranty period for pumps and fans is three months). During this warranty period, free maintenance services are provided to customers. After the warranty period ends, we can offer long-term paid maintenance services as well as technical support for the integrated SBR wastewater treatment equipment, depending on the customer’s needs. 2. Three months after the integrated SBR wastewater treatment equipment is handed over to the client following completion of its commissioning, technical personnel will be sent for a follow-up visit to assess its operational status, hear the user’s feedback, establish records, and make further improvements. 3. Operation training: Our company’s technical staff provide basic fault diagnosis training to the relevant operators to ensure they learn how to handle such issues ； 4. For projects in different regions, in the event of an emergency, the company decides on an emergency response plan within two hours and arranges to arrive at the site to resolve the issue within 72 hours.