Problems with the salt water pump
Thread Content
How to increase the current of the salt water pump while keeping the valve position of the control valve unchanged
Switch from automatic to manual mode to increase the pump’s operating frequency (in the case of a variable-frequency pump).
During actual operation, the current of the pump also changes depending on the flow rate or pressure. What you mean is that the current of the pump is too low; I think that if there are no issues with the process itself, then it’s likely a problem with the selection of the motor. The motor power has been chosen to be too high.
It seems that the power of the pump has been chosen to be too high. . . . A big horse is pulling a small cart. . . .