How to connect explosion-proof sensors to wire conduit pipes
Thread Content
An electronic scale has 4 sensors. The main cable enters the explosion-proof junction box through a conduit pipe; the junction box has 4 outlet ports with G1/2 threads. The sensor cables have external threads, and the manufacturer of the explosion-proof hoses said that such small threads make it impossible to produce those hoses. How should the sensors be connected to the junction box? I would be very grateful if experienced experts could share their insights. Thank you so much
It depends on the length of the wire; if it’s short, it’s not a problem to leave it out. If that doesn’t work, the junction box can be expanded or a conversion adapter can be used. A machinist with threading skills can handle this task easily
Explosion-proof sealed joint + galvanized pipe guard
These days, I’ve never heard of any hardware parts that can’t be processed; it’s likely you’re just unwilling to spend the money
Maybe one is a coarse thread and the other is a fine thread; couldn’t we just manufacture a threaded part with different threads on each side?
Explosion-proof sealed joint + galvanized pipe cap; a section of cable in the middle is exposed, which also meets the specification requirements