How many compression stages are required for a reciprocating compressor with a pressure ratio of 10?
Thread Content
How many compression stages are required for a reciprocating compressor with a pressure ratio of 10?
The conditions you’ve provided are far too limited. From the perspective of saving effort, it would be best to maximize the isothermal efficiency of the entire machine, but this still depends on your medium; too high an outlet temperature can cause changes in the chemical properties of the medium
The pressing force is a bit high compared to level 2 compression; level 3 should be appropriate
Level 4 compression is ideal, as it helps keep the size of the device from becoming too large
Generally, the pressure ratio in reciprocating designs ranges from 3.5 to 4; therefore, it is not possible to achieve a pressure ratio of 10 with a single stage, and a two-stage compression system must be used~~
For applications requiring high nitrogen purity, it is recommended to use diaphragm compressors~~
How can one determine what type of medium requires how many stages of compression? ?
The pressure ratio is determined based on the outlet temperature limit. The outlet temperature limit is set according to the process medium; for example, 120 degrees is recommended for hydrogen