Help: The gauge reading of the float level meter on site is zero
Thread Content
Today the temperature is extremely low, at minus 14 degrees. Initially, the level of the reflux liquid at the site showed 40%, but then it suddenly dropped to 0. It’s not possible to determine the reason for this; if it froze, it should remain in place
It should still be frozen. Generally, heating and insulation measures are applied to the floats on site, including those related to the torque rods. Theoretically, they can get frozen in place, but floats operate based on the principle of a float rising or falling due to changes in buoyancy; therefore, freezing should occur from the center outward, taking into account the possibility that the float inside the container freezes and sinks.