Calculate the heat exchanger area
Thread Content
Calculate the area of a heat exchanger. The fluid to be cooled is a mixture of toluene and xylene, in a mass ratio of approximately 1:3.5. The temperature is 148°C, and the flow rate is 1.5 tons per hour. It needs to be cooled down to 30°C, using circulating water – with the inlet water at 26°C and the outlet water at below 40°C. What size heat exchanger is required? reward_7ree
It is recommended that the original poster refine the question; it is presumed to be related to the top condensers for toluene and xylene. It would be best to provide the operating pressure of the gas (otherwise, calculations can be done based on saturation at 148 degrees). Additionally, it would be useful to know what type of heat exchanger is being used, as well as the material used. For technical upgrades, it is recommended to provide information on installation dimensions and other requirements. After all, your sudden request for a heat exchange area makes it difficult to get anyone’s help, even if one wants to assist.
It is recommended that the original poster refine the question; it is presumed to be related to the top condensers for toluene and xylene. It would be best to provide the operating pressure of the gas (otherwise, calculations can be done based on saturation at 148 degrees). Additionally, it would be useful to know what type of heat exchanger is being used, as well as the material used. For technical upgrades, it is recommended to provide information on installation dimensions and other requirements. After all, your sudden request for a heat exchange area makes it difficult to get anyone’s help, even if one wants to assist.