Sulfur Daily Question, April 3rd------5 wealth for participation, 10 wealth for correct answers
Thread Content
What are the reasons for water content in acidic gases and what are the treatment methods?
The reason for water presence is the high liquid level in the separation tank. Solution: Lower the liquid level in the separation tank to a reasonable level.
(1) Excessive feed rate. (2) The amount of heating steam is too large. (3) Excessive amount of acidic gas is extracted. (4) The tower top temperature is too high. Treatment method: (1) Control the feed rate properly; when cold feed is available, regulate the ratio of cold to hot feed. (2) Adjust the heating steam flow rate properly. (3) Control the pressure in the reflux tank to prevent excessive extraction of acidic gases in short periods. (4) Adjust according to the factors causing high tower top temperature.
Reason: (1) Excessive feed volume. (2) The amount of heating steam is too large. (3) Excessive amount of acidic gas is extracted. (4) The tower top temperature is too high. Treatment method: (1) Control the feed rate properly; when cold feed is available, regulate the ratio of cold to hot feed. (2) Adjust the heating steam flow rate properly. (3) Control the pressure in the reflux tank to prevent excessive extraction of acidic gases in short periods. (4) Adjust according to the factors causing high tower top temperature.
Reason: (1) Excessive feed volume. (2) The amount of heating steam is too large. (3) Excessive amount of acidic gas is extracted. (4) The tower top temperature is too high. Treatment method: (1) Control the feed rate properly; when cold feed is available, regulate the ratio of cold to hot feed. (2) Adjust the heating steam flow rate properly. (3) Control the pressure in the reflux tank to prevent excessive extraction of acidic gases in short periods. (4) Adjust according to the factors causing high tower top temperature.
What are the reasons for water content in acidic gases and what are the treatment methods? What are the reasons for water content in acidic gases and what are the treatment methods? Answer: Reason: (1) Excessive feed volume. (2) The amount of heating steam is too large. (3) Excessive amount of acidic gas is extracted. (4) The tower top temperature is too high. Treatment method: (1) Control the feed rate properly; when cold feed is available, regulate the ratio of cold to hot feed. (2) Adjust the heating steam flow rate properly. (3) Control the pressure in the reflux tank to prevent excessive extraction of acidic gases in short periods. (4) Make adjustments based on the factors causing high temperatures at the top of the tower.
Reason: (1) Excessive feed volume. (2) The amount of heating steam is too large. (3) Excessive amount of acidic gas is extracted. (4) The tower top temperature is too high. Treatment method: (1) Control the feed rate properly; when cold feed is available, regulate the ratio of cold to hot feed. (2) Adjust the heating steam flow rate properly. (3) Control the pressure in the reflux tank to prevent excessive extraction of acidic gases in short periods. (4) Adjust according to the factors causing high tower top temperature.
What are the reasons for water content in acidic gases and what are the treatment methods? Answer: The reason for water being present in the acidic gas is: (1) excessive feed volume. (2) The amount of heating steam is too large. (3) Excessive amount of acidic gas is extracted. (4) The tower top temperature is too high. The method for dealing with water in acidic gas is: (1) properly control the feed rate; when cold feed is present, control the ratio of cold to hot feed. (2) Adjust the heating steam flow rate properly. (3) Control the pressure in the reflux tank to prevent excessive extraction of acidic gases in short periods. (4) Adjust according to the factors causing high tower top temperature.
Reason: 1. Excessive feed rate. 2 The amount of heating steam is too high. 3 The amount of acidic gas extracted is too high. 4 The tower top temperature is too high. Treatment: 1. Control the feed rate properly; when cold feed is available, regulate the ratio of cold to hot feed. 2 Adjust the heating steam flow rate. 3. Control the pressure in the reflux tank properly. 4 Adjust according to the high tower top temperature.
The top of the tower is at a high temperature, and the cooling effect of the top cooler is poor.