Diesel hydrogenation compressor
Thread Content
Besides being used when switching between the cycle hydrogen compressor and the fresh hydrogen compressor, in what other situations is it necessary to use the bypass hydrogen for regulation?
When the circulating hydrogen compressor unit needs to be shut down for maintenance
We only have one hydrogen circulation machine. . . Can’t switch. Newbie; I’ve never seen that side quest used before. I understood it only after reading what was posted above. Learned something
Where are your crosslines located? Regarding the inlets and outlets, in addition to those mentioned above, it is also possible to reduce the load on the compressor slightly when the circulating hydrogen compressor experiences overcurrent due to a large pressure difference at the inlets and outlets; however, this reduces the circulation volume as well as the hydrogen-to-oil ratio