HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

There is a strange phenomenon with manual stop valves, and I hope everyone can help me analyze it

2016-04-18View Original

Thread Content

I work at a gas station, handling the manual gas-phase shut-off valve at the unloading station. When the pressure is equalized during unloading, everything works fine as long as the valve is opened to less than half of its maximum position. But once it is opened beyond half that position, it becomes obvious that the sound of gas flowing inside the pipes decreases. I then close the shut-off valve and try opening it again slowly; as long as it isn’t opened past half, both the flow rate and the sound remain normal. After that, I disassembled the shut-off valve and found that the connection between the valve stem and the valve core was in good condition, with no signs of looseness. With no other solutions, I sought help from the manufacturer’s technicians, who sent me a new shut-off valve. Yet the same problem persisted even after replacing it. May I ask, what could be the possible reasons for such situations? ? ? I’ve really never encountered something like this; it’s so unsolvable!
Reply #22016-04-18
Do you mean that the sound is louder when the valve is opened slightly, and quieter when it is opened more fully?
Reply #32016-04-19
Is resonance occurring in the gas flow? Does the stop valve used for steam also make noise?
Reply #42016-04-19
It’s normal – when the opening is small, the sound is loud; once it’s balanced, the sound is relatively softer.
Reply #52016-04-19
When the voltage drops on both sides are balanced, the sound level naturally decreases.
Reply #62016-04-19
That’s right; during unloading and leveling, it should be kept running no matter what, as the noise level remains very high
Reply #72016-04-19
When the valve is opened slightly, the throttling effect is strong, so the noise is loud; when the valve is opened more fully, the throttling effect is reduced, and the noise becomes quieter. This should be a normal phenomenon
Reply #82016-04-19
I think the normal situation is that it makes low noise when turned down, and high noise when turned up
Reply #92016-04-19
I think it’s due to an imbalance in stress: lol
Reply #102016-04-19
That makes sense. When the pressure is balanced, there’s a ‘hiss’ sound when it’s opened; if the pressure is unbalanced, there’s a ‘hiss-hiss-hiss-hiss’ sound--

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.