Mass flow meter for the free fall of small solid particles
Thread Content
This post was last edited by fanjianmin001 on 2016-4-20 at 16:43. As the title suggests, we want to add a mass flow meter that measures the free-fall flow rate of small solid particles at our on-site filling station. The particle diameter ranges from 0.1 to 0.15 mm, the tank height is 10 meters, and the ambient temperature lies between -20 and 60 degrees Celsius. The pipeline is stainless steel with a DN200 diameter. The normal range is 60 T/H, with a maximum of 90 T/H. The density is 0.8–1.0 Kg/L. It is installed in vertical pipes, and the medium cannot fill the pipes due to free fall. Please be a bit understanding.
You need a powder electrostatic measurement instrument – turn to us
Here, we can accurately measure the free-fall mass of solid particles as well as their flow velocity. For more information, please call 13488680104 or contact us via WeChat
It is recommended to use a weighing device; the pipe should not be filled to capacity, as this makes it difficult to measure the flow rate