MTI’s **chemical material selection series
Thread Content
Help: MTI’s selection series for **chemicals – 62 MS-1 sulfuric acid, MS-2 organic acids, MS-3 HCl and Cl2, MS-4 HF, MS-5 *ao acids, MS-6 ammonia and caustic alkalis, MS-7 phosphoric acid, MS-8 organic solvents
They are all highly corrosive media; an appropriate tetrafluoroethylene-based anti-corrosion material can be selected based on temperature.
This post was last edited by Yu Xuejie on 2016-4-25 at 11:28. Well, the temperature is quite high, exceeding 250 degrees, so PTFE materials are not suitable for this use.
This post was last edited by Wang Genrong on 2016-4-24 07:25. Are the media being exchanged in separate containers or in the same container?
Shreir’s Corrosion – Volumes 1–4, 3rd edition. Looking for this as well; is it available?