Thread Content
I. Overview: The XCB type sliding vane pipeline pump is a new generation of product designed by integrating advanced foreign technologies, filling a gap in the domestic market. It can be used as a transfer pump, tank transfer pump, and self-priming pump in oil transfer systems. In special operating conditions, it can be used as an ultra-high self-priming pump; it has a short priming time and its efficiency is twice that of other pumps. For the same flow rate and pressure, this product requires very little motor power, making it a highly efficient and energy-saving solution. It can also be changed to a magnetically driven leak-free pump. It can be used as an explosion-proof pump in all industrial fields. The XCB type sliding vane pipeline pump is suitable for transporting liquids that contain no solid particles or fibers, with a temperature range of -40 to 300°C and a viscosity of 0.6 cSt to 600 cSt. It can transport flammable, explosive, volatile liquids that lack lubricating properties, such as methanol, water, benzene, alkanes, weak acids, strong bases, and other similar liquids. The product has excellent self-priming capabilities; its dry suction limit vacuum can reach 0.075 Mpa, while the ultimate vacuum level can reach 0.095 Mpa. It can be modified to use magnetic drive for the easy transfer of liquids that must not leak at all. II. Specific Advantages 1. The XCB type sliding vane pump features a small size, high efficiency, smooth operation, strong self-priming capability, and the ability to adjust flow rate by changing the speed. It can operate properly even when the engine is at idle, meeting the requirements for flow rate and pressure. A safety return device can be installed. 2. The XCB type sliding vane pump was developed by our company through integrated design using software such as SolidWorks and CAD, based on the existing products of various manufacturers of similar products both domestically and internationally. Each unit has been tested and adjusted in our laboratory; it features an excellent self-priming capability, with a maximum self-priming vacuum level of 0.095 Mpa. The maximum vertical suction height is 9.5 meters, while the maximum vacuum level when pumping without liquid is 0.07 Mpa, with a maximum vertical suction height of 7 meters in this case. This type of product features a simple structure, high efficiency, and low internal leakage. Based on customer feedback, domestic slide pump requires shorter periodic maintenance time compared to other pumps; however, this product needs to be disassembled and reassembled regularly to replace the slides, making its maintenance rather complicated. After thorough research, our company has upgraded and innovated upon similar products, enabling rapid maintenance within 5 minutes; the sliding components are made of imported materials, which significantly extends their service life. This type of product is now classified as a portable pump. Highly praised by users.