What tools are generally used for pipeline surveying?
Thread Content
This post was last edited by Alone_l on 2016-5-4 at 13:03. The client has many pipelines that need to be measured, each about 2000 meters long; it is necessary to determine which measuring tools are required； Please let me know, thank you! The main purpose of the measurement is to determine the length of each pipeline, as well as to locate the positions and dimensions of elbows and tees within the pipes.
Use a vernier caliper to measure diameter, and a tape measure to measure length.
Is this how pipelines are measured in factories in general?
What do you want to measure? Ruler, vernier caliper, thickness gauge
A ruler is used to measure the length of pipelines, a ruler is also used to measure their diameter, and again, a ruler is used to measure the wall thickness of pipelines. How can one measure pipelines without knowing anything about it? This should be basic knowledge from middle school. The weight of a pipeline can be calculated by multiplying the linear density by the length ； To determine the material, one can check the material code or conduct a material inspection.
I forgot to mention it. I need to measure the exact length of the pipelines, as well as the angles at elbows, tees, and so on.
It’s just about seeing what is needed for on-site measurements; in the past, plumb bobs, levels, tape measures, and calipers were used for such measurements. Since this method is based on my own understanding, I’m not sure if it’s correct, so I’m asking if anyone has any better approaches.
If you don’t want to use a ruler, you can check the construction drawings