New technology for degreasing and cleaning pipes in heat transfer oil furnaces in 2016

Thread Content

SP-301 heat transfer oil furnace pipeline cleaner is suitable for various boilers and their pipeline systems that use heat transfer oil as a medium. Detailed operating procedures for SP-301 heat transfer oil furnace pipeline cleaner: 1. First, reduce the system temperature to the range of 100°C–230°C (if the system’s normal operating temperature is already within this range, cleaning can be carried out online without the need to lower the temperature). 2. Then, the sp-301 cleaning agent, calculated at 6%-15%, is added to the heat transfer oil furnace system through a high-level tank. When adding, it should be added in batches and slowly. (Because the cleaner is very effective, adding it all at once will cause large pieces of oil scale on the inner walls of the pipes to fall off, which hinders the smooth progress of the cleaning process.) 3. After adding the cleaning agent, pay attention to the changes in pressure shown on the pressure gauge; when there are significant changes in pressure, clean the filter screen promptly to prevent large particles of dissolved oil residues and dirt from clogging it. 4. As time passes, the temperature difference in the external heating pipeline gradually returns to normal, and the pressure gauge also returns to normal. 5. Perform cyclic cleaning for about 3 to 7 days until the cleaning is complete. Call 18678192635 to discuss further.