These parameters can determine the container category
Thread Content
These parameters can be used to determine whether a container belongs to the above-mentioned category: 1. Diameter: 1000X1300; Volume: 1000L; Medium: Nitrogen; Operating temperature: 10~60; Operating pressure: -01/0.09; Support type: Legs. 2. Diameter: 1200X1600; Volume: 2000L; Medium: Non-corrosive materials; Operating temperature: -19~150; Operating pressure: -01/0.09; Support type: Legs. 3. Diameter: 1200X1600; Volume: 2000L; Medium: Corrosive materials; Operating temperature: -19~150; Operating pressure: -01/0.09; Support type: Legs
Operations with a pressure below 0.1 MPa are not classified
For this operating pressure of -01/0.09, what range should be used for the design pressure?
The operating pressure is below 0.1 MPA, and it does not meet any of the conditions mentioned above; therefore, it is not classified (this has nothing to do with the design pressure)
The operating pressure is -0.1/0.09; so what range should the design pressure be set at?
Recommendation: HGT 20580-2011 Basic Regulations for the Design of Steel Chemical Containers, Section 4: Determination of Design Pressure
None are classified; they are not subject to fixed regulatory controls
A working pressure of not less than 0.1 MPa is the primary condition for classification...
Operations with a pressure below 0.1 MPa are not classified