The drill wasn’t done properly; do it again!

Thread Content

1.jpg “Report to the shift supervisor: there is a leak in the outlet pipe of the ammonia storage tank, and there is a strong pungent odor at the scene. Please immediately cut off all power supplies to the area where ammonia is present!” ”“Immediately close the tank outlet isolation manual valve to flush out the leakage. ”After reporting the emergency to the shift supervisor, inspector Hou Wenfeng put on a gas mask and gloves, rushed into the area where the leak was occurring, closed the manual isolation valve on the outlet pipeline of the storage tank, and then immediately activated the fire-fighting water and sprinkler systems to spray water on the leaking area. “Stop! ”Xu Sihua, who was in charge of supervising the drill, called out to Hou Wenfeng, \"Did you check whether the isolation had taken effect after closing the manual isolation valve?\" ”“The valve is fine; there’s no need to check it anymore. ”Hou Wenfeng muttered. Xu Sihua immediately became serious: \"Can you guarantee that it will still be in good condition when an emergency occurs?\" Don’t just follow the plan mechanically; understand the purpose of each action clearly. Let’s try again! ”Hou Wenfeng’s cheeks turned red as he hurried into the training area to get ready for the drill again. Brief comment: Drills are not just about following a script; safety drills should be carried out properly on a regular basis so as to avoid panic when emergencies occur.