Setting of sampling ports for the press circulating water
Thread Content
The press has an independent circulating water system, and samples of this circulating water are taken regularly. Are there any requirements regarding the location of the sampling points? Is it from the upper or lower part of the water tank? The manager requires samples to be taken from the upper part; sampling from the bottom does not yield accurate results
Samples taken from the condensate discharge points of the operating circulating water pipes are the accurate water samples
If there is a water cooler, take samples from the water cooler
There may be impurities or slag at the bottom; measurements might be taken of things like chlorine content, in order to assess corrosivity