How are the waste gases from the sulfur pool sent to the reactor?
Thread Content
May I ask, for the bubbling waste gas from the sulfur ponds or the flash vapor waste gas, is a steam pump always used to transfer them to the sulfur production reactor? What is the design outlet pressure of the steam ejector? What grade of steam, or should we use air? Who are the steam ejector manufacturers? Thank you!
We use a vacuum pump here; the steam pressure is 1.0 Mpa, and the outlet pressure should be around 0.03 Mpa. This is a technology that is well-established, so it shouldn’t be difficult to find manufacturers for it!
I can use both a blower and a fan here. The steam used for the extractor is at 1.0 MPa, with a design temperature of 320 degrees and an outlet pressure of 0.065 MPa. This outlet pressure may not be very useful as a reference, since the overall operating pressure in our sulfur production process has increased by 15 kPa
Increase air extraction from the liquid sulfur tank; the power comes from 1.0 MPa steam
1.0MPa steam for the extractor,