Aspen simulation error
Thread Content
The parameters of pure components are retrieved from the SDF table. These parameters are used with the ELECNRTL option set, unless you enter your own parameters in the PROP-DATA sections. The parameters retrieved for the H2O component are: VLBROC, PLXANT. The parameters retrieved for the H2SO4 component are: OMEGA, DHFORM, DGFORM, CPDIEC, DHVLWT, PLXANT, CPIG. The parameters retrieved for the HSO4- component are: CPAQ0. The parameters retrieved for the SO4-2 component are also CPAQ0. The parameters retrieved for the H2SO4 component include: TC, VC, ZC, MW, RKTZRA. Flowsheet analysis: The calculation order for the flowsheet is B1. Please, guys, analyze the reasons behind this
There is a parameter for electrolyte deficiency; it can be addressed by ionizing the electrolyte.
Use physical property method to convert to ELECTRIC NRTL
There should be error reports further down; take a look at that part as well.