Seeking help with material accumulation in the granulation tower
Thread Content
Since the blower was modified, material often accumulates near the top of the granulation tower; the cause has not yet been identified. Please provide an analysis
It is recommended to start by comparing the modifications to the blower in terms of air volume, air pressure, and airflow distribution, and then move on to the material nozzles
If all other operating conditions remain unchanged, it is possible to check whether the increased air volume resulting from the fan modification causes the fine particles being sprayed to be carried away by the airflow and adhere near the top of the tower.
A mismatch among the blower, the diameter of the granulation tower, and the production load results in gas deviation within the tower or an excessively high gas flow rate